Category: Water Line

SPHEROIDAL CAST IRON CLAPET CHECK VALVE GJS-500 RUBBER SEAL PN 16 FLANGED ART. 106 Swing check valve made of spheroidal cast iron EN-GJS-500, with galvanised

Y-strainer made of spheroidal cast iron EN-GJS 500, with galvanised steel screws B7-2H. AISI 304 stainless steel filter cartridge.

Gate valve made of spheroidal cast iron EN GJS 500-7 PN 10/16, flanged with flat body, spheroidal cast iron wedge rubberized with NBR or EPDM, maintenance-free internal screw. Design according to standard UNI-EN 1074/1-2. The gate valve is designed for full passage with minimum pressure drop.

Gate valve made of spheroidal cast iron EN GJS 500-7 PN 10/16, flanged with flat body, spheroidal cast iron wedge rubberised with NBR or EPDM, maintenance-free internal screw. Design according to UNI-EN 1074/1-2. The shutter is designed to have total passage, with minimum pressure drop.

Butterfly valve type LUG, spheroidal cast iron EN GJS 400-15 PN16, design according to UNI-EN 593:2017, EPDM rubber sleeve, and threaded coupling slots/holes for connection to EN 1092 flanges.

Wafer-type butterfly valve, spheroidal cast iron EN GJS 400-15 PN16, design according to UNI-EN 593:2017, EPDM rubber sleeve, and coupling slots/holes for connection to EN1092 flanges. The valve is operated using an aluminium lever, however, for diameters up to and including DN 200, it is supplied with a gear reducer, which is equipped with a hand wheel for side operation (ISO 5211 CONNECTION). The valve is designed to have a minimum pressure drop at opening.

In-line or angle valve, spheroidal cast iron EN GJS 500-7 PN 16, threaded EN 10226. Design according to UNI-EN 1074/1-2. The valve is designed to have full passage, with minimum pressure drop. Sealing is achieved by compression of the elastomer covering the wedge (in-line type) or the plug (angle type).

Double or single float vent made of spheroidal cast iron GJS 500-7, PN16. The vent is defined as having a ‘triple function’ (FILLING – EMPTYING – PASSING) because, if installed correctly on water mains, it can evacuate large quantities of air during the filling phase of the mains; it also allows large quantities of air to enter during the emptying phase of the pipeline, which allows the vacuum effect to be contained and enables even small quantities of air to be evacuated. The vent has a high ratio between the diameter of the air passage orifice and the nominal diameter DN. The floats are coated with non-toxic elastomer. It is supplied with flanged connections and AISI 304 stainless steel screws.

Double leaf check valve made of grey cast iron GJL 250, PN16, with stainless steel shaft and springs. The double leaf is made of spheroidal cast iron GJS 500 and is fully nickel-plated. Seal on valve seat made of EPDM. The overall dimensions are by EN 558 – 1 series S16.

GREY CAST IRON GATE VALVE GJL-250 PN 10 – METAL SEAL – FLAT BODY ART. 107 Grey cast iron gate valve GJL-250 PN10, metal seal,

SPHEROIDAL CAST IRON BALL CHECK VALVE GJS 500 PN 10-16 ART. 106P A ball check valve made of spheroidal cast iron GJS 500, with stainless